Table of Contents
Advertisement
Installation and operation
Appliance Start-Up
1. Place the motor block on an even, stable, and dry surface.
2. Prepare food products for processing.
3. Put them in the mixing beaker. Do not overfill the mixing beaker. Pay attention to
the filling marks placed on the mixing beaker.
The operational volume of the mixing beaker up to 'MAX' mark is 2,000 ml.
During processing of hot or foaming products and during work at high speed, fill the
mixing beaker only up to 2/3 of the maximum operational volume of 2,000 ml.
ATTENTION!
There is a risk of damaging the appliance if the mixing beaker is inserted
onto the motor block when the appliance is on.
Disconnect the plug from mains power supply. Always start with inserting the
mixing beaker onto the motor block, and them proceed with connecting the
appliance to the power supply.
•
Insert lid onto the mixing beaker, so that it the magnet and the proximity sensor
come in contact with each other (Fig. above).
The appliance must be started only with the correctly inserted lid and correctly
inserted mixing beaker.
4. Close the lid with the transparent lid plug.
150159
EN
Fig. 4
15 / 22
Advertisement
Table of Contents
