Advertisement
Smart Controller
MODEL
ODDMF-ST
CONNECTION AND SETUP
Operation with 1 Fan
Connect thermal probe to NTC
port. Connect fan to port OUT1
using the 3.5mm jack wire
included with your fan.
Powering the Controller
Screen Light ON/OFF [Night Mode]
Manual/Auto Mode
info@ortechindustries.com
www.ortechindustries.com
Operation with 2 Fans
Connect thermal probe to NTC port. Connect
fan to ports OUT1 and OUT 2 using the
3.5mm jack wires included with your fans.
• This speed controller
receives power through its
connection to the fan
• Once the thermal probe and
at least one EC fan is
connected to the controller,
the POWER button will
illuminate on the screen
• When the controller is
powered ON, the screen
light can be turned off by
pressing the MODE button
and UP arrow button
simultaneously. The light will
turn back on once any
button is pressed
• To select the smart controller's operating mode, press and hold the
MODE button for 3 seconds. In AUTO mode, you will see the AUTO
icon displayed in the top central section of the display. In MANUAL
mode, you will see the HAND icon displayed in the top central
section of the display.
13376 Comber Way
Surrey BC V3W 5V9
Operation with 3 Fans
Connect thermal probe to NTC port. Connect fan to
ports OUT1, OUT 2 and OUT3 using the 3.5mm jack
wires included with your fans.
Operation with 4 Fans
Connect thermal probe to NTC port. Connect fan
to ports OUT1, OUT2, OUT3 and OUT4 using the
3.5mm jack wires included with your fans.
Celsius/Fahrenheit
Lock Controller Buttons
375 Admiral Blvd
Mississauga
,
ON L5T 2N1
Instruction Manual
• When the controller is powered
off (and connected to the fan),
press and hold the MODE
button for 3 seconds. Once the
temperature appears on the
screen, use the UP and DOWN
arrows to select Celsius or
Fahrenheit. Press POWER
button to save your preference.
• To prevent any changes to your
settings, you may lock the
controller. You can LOCK and
UNLOCK the controller by
holding the UP and DOWN
arrow buttons simultaneously.
The LOCK icon will flash on the
screen when the controller is in
the locked state.
1-888-543-6473
1-888-541-6474
Advertisement
