Advertisement
Remove the racks from inside of the unit and then place the
unit on its side. Remove (9) screws and remove the bottom
panel.
Note: Both units have 9 screws but the layout is different.
FS140147 REV: ORIG
7-27-2020
Side LED Assembly Replacement
(Model 891 used in images)
LED ASSEMBLY REPLACEMENT
Unplug the LED assembly from the power board.
From a rear view of the unit, the:
Left LED assembly plugs into CN5.
Right LED assembly plugs into CN3.
MODEL 791/891
0027265SK & 0027266SK
Page 2 of 5
Advertisement
