Using The Template Guide; Service And Maintenance - KNOVA KN RO-1304 Manual

APPLICATIONS

5. USING THE TEMPLATE GUIDE

The template guide can be used in various ways:
• Producing duplicates of a particular design of an
original shape.
• Producing decorative features.
• Repetitive cutting shapes.
1) To attach the template guide turn the trimmer upside
down and remove the screws as follow.
2) Insert the template guide into the base of the trimmer
and secure using the fixing screws.
Screwdriver
Soleplate
Screw
Milling cutter
Soleplate
Work piece
NOTE: The finished cutting size gets different from the
template guide size as there is a distance L from milling cutter
to outer edge of template guide.
Equation as below:
Size of guider outer edge-cutter diameter
L=

SERVICE AND MAINTENANCE

WARNING
Always disconnect the device before
performing any adjustment or maintenance operation.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent in order to avoid a
hazard. Disconnect from the power supply immediately
if the supply cord is damaged. Take care not to expose
this tool to the rain.
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastic
parts are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
LUBRICATION
All the bearings in this tool are lubricated with a sufficient
amount of high grade lubricant for the life of the unit under
normal operating conditions, therefore no further lubrication
is required.
Cutting
sleeve
L
Template guide
10
2