Carrier Assembly - Thule VERTEX SWING AWAY Quick Start Manual

1

CARRIER ASSEMBLY

- A. Position stinger assembly in bracket of swing arm assembly as
illustrated.
- Install 1/2 – 13 x 5.5" bolt, flat washer and lock nut as illustrated.
- Tighten firmly using Thule tools provided.
506-7079
A
CARRIER ASSEMBLY
- B. Position upright assembly in swing arm assembly bracket as
illustrated.
- Engage lock-up pin and loosely thread lower locking handle.
- Install 1/2 – 13 x 5.5" bolt, flat washer and lock nut as illustrated.
- Tighten firmly using Thule tools provided.
B