1
Only professional technicians are allowed for installation and maintenance.
2
Installation in any damp, condensed-phase environment with inflammable
and explosive gas is forbidden.
3
You are prohibited from touching the conductive part when the product is
operating.
4
Do not install the product at places where gas medium can cause metal
corrosion and insulatin damage.
5
After installing the product, finishing the inspection of load side line and
splitting the fire-resistance circuit, the controller must be set to "Manual"
position and the product must be set to split position. Switch the controller
to "Auto" position after line fault is eliminated.
6
To avoid dangerous accidents, the products should be installed and
secured according to the instructions.
7
This product is applicable to environment A. The product will generate
harmful electromagnetic interference if used in environment B, in which
case, user should take proper protective measures.
Safety Warning