Product Outline; Feature - Panasonic GA-AS16TPoE+ Installation Manual

1

Product Outline

GA-AS16TPoE+ has 18 ports which are 10BASE-T/100BASE-TX/1000BASE-T compatible
ports.
Ports 1 to 16 (twisted pair ports) support IEEE802.3at PoE power supply functions.

1.1 Feature

 Ports 1 to 18 (twisted pair ports) are 10BASE-T/100BASE-TX/1000BASE-T
corresponding to auto-negotiation.
 The twisted pair ports 1 to 16 can supply power conforming with IEEE802.3at. They
can supply a maximum of 30 W of power per port, and the device total can supply a
maximum of 112 W of power.
 All of the twisted pair ports are equipped with straight/cross cable automatic
detection functions. Straight cables can be used to make interconnections without
distinctions between the terminals and network devices having to be made.
(The factory default is for ports 1 to 16 to have MDI-X be fixed.)
 If equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet functions
(hereinafter EEE), and if data is transmitted when linked up, the energy efficient
state will be moved to, whereas each port can suppress power consumption.
 Automatically detects the connection states via the equipped energy efficiency
mode, and suppresses power consumption to required levels.
 VLAN function allows free grouping of up to 256 VLANs.
 The IEEE802.1p compatible QoS function is supported.
 Has an Internet Mansion function, which ensures security between each door.
 As a factory default, IP address in this Ethernet Switch is not assigned to the device.
The address can be changed by connecting this Ethernet Switch to your PC using
twisted pair cable, if your PC has ZEQUO assist plus installed on it (ZEQUO assist plus
is downloadable from Panasonic' s website.)
 Due to the loop detection/shutoff function, a port where loop has occurred can be
automatically shut off to prevent loop failures. Moreover, it can be referring the
history of loop on the setting screen.
7