Advertisement
8. OPERATING
The electrical connections of the control panel should be checked.
It should be checked that that the control panel cover is closed.
It should be checked that the electrical energy is not interrupted and the phases are complete.
Control panel settings should be made according to the resistance to be used.
You can find the appropriate settings for the panel you are using in the settings entry menu.
9. MAINTENANCE
9.1. Monthly Maintenance:
Cut off electrical power before starting maintenance.
The control panel's electrical connections should be checked for loosening.
The control panel grounding line must be checked. Check that there is no discoloration in the
electrical cables due to wear, puncture or heating.
10. GENERAL INFORMATION
The control panel that you have purchased is designed based on a microcontroller.
All control operations on the panel are done electronically and stored.
The electronic board inside the control panel is manufactured with high technology SMD material.
An SMD led lamp and LCD display with minimum energy consumption are used as indicators.
5
We reserve the right to make changes in technical information.
Advertisement
