Advertisement
2. Warnings about situations that may be harmful to human or environmental health:
As long as installation, commissioning and service are carried out by authorized personnel, your
panel does not pose any safety risks.
• It may cause burns, electric shock or death.
• Disconnect electrical connections before any work on the panel.
• Make sure the panel is ground-connected.
• Loosening of the electrical connections may result in electrical leakage and injury.
- The methods for starting and stopping the panel are described in the manual.
- During the re-commissioning of the panel, the sections that have been processed must be
monitored.
- Caution should be taken against water leakage and splashes in the panel, and if possible,
a "leakage current relay" should be installed.
- All electrical cables must be connected to the panel using a protective sheath.
3. Unacceptable Actions:
Design changes / modifications to the control panel must only be made with the permission of
the manufacturer. If other parts are used on the control panels, the manufacturer shall not be
liable for the consequences of the changes.
4. Special Safety Equipment and Recommendations on the Panel:
It may cause electric shock and death.
Improper intervention in the control panel may cause damage to it.
In the control panel, there are protection panels made of insulating plexiglass material which are
designed as an outline to protect the electronic card from external factors.
The panels must not be removed by unauthorized persons and no intervention should happen to
the electronic card.
5. Information on Efficient Use of Energy Savings:
The control panel you have purchased does not consume energy by itself, but pumps and motors
are energy consuming products for their intended use.
Proper use; extremely important for personal reasons and national economy.
Resistance suitable to the control panel should be used.
All electrical connections are made correctly and in accordance with the instructions; thus, loss
and leakage electricity could be prevented.
3
We reserve the right to make changes in technical information.
Advertisement
