Chapter 7 Mobile Network; Introduction; Mobile Network Settings - Newland NLS-NFT10 User Manual

Introduction

The NFT10 can also use a 4G network to connect to the internet. To establish a 4G connection, you must have a SIM card
installed in your NFT10.
This terminal can support 4G/3G/2G network provided by Telecom, Unicom, or Mobile

Mobile Network Settings

If no Wi-Fi networks are available, or if you have turned Wi-Fi off, then the NFT10 connects to the Internet via your cellular
data network when available.
Turn on the cellular network:
1. Swipe down from top to bottom on the home screen and it will display the drop-down mean, Find
to turn Cellular data on.
Or Go to Settings-> "Network & Internet" -> "Mobile network" -> turn on "Use SIM"
2.
47

Chapter 7 Mobile Network

Swipe down
and tap it