Output Mode - Newland NLS-NFT10 User Manual

Output Mode

The NFT10 provides three output modes: Simulate keystroke, Output via API, and Fill in EditText directly.
1. Simulate keystroke: Output scanned data to keyboard buffer to simulate keyboard input.
Character interval (ms): A character interval of 0-100 milliseconds may be placed between the transmissions of each
character of scanned data.
2. Output via API: Application acquires scanned data by receiving system broadcasts.
3. Fill in EditText directly: Output scanned data at the current cursor position in EditText.
Overwrite output: Clear the text input box before sending the barcode currently scanned to make sure only the most
recently scanned data is present in the text input box. This feature is available only when Simulate keystroke or Fill in
EditText directly is selected.
Output enter-event: Send an Enter Key after each barcode is scanned.
Send virtual keyboard function: Make send virtual keyboard function as "action done", "action search", "action previous",
action search, etc.
24