Newland NLS-NFT10 User Manual page 39

Advanced: The features listed here are designed to improve the scanning performance and energy efficiency of the
terminal.
1. Acuscan: When selected, the terminal only decodes the barcode aimed squarely by the aiming pattern. It is advised
to select it to ensure that only the desired barcodes are read if multiple barcodes are placed closely together.
2. Multiple Barcodes: When selected, the terminal can decode multiple barcodes at the same time, and the maximum
number of the barcodes can be set per actual needs.
3. Other: Tap DETAIL to access the following parameter settings
Noise Reduction: This feature is designed to reduce noise in images produced by the terminal. However, the terminal
shows a slight decrease in scanning speed when using this feature. It is recommended to enable it only when necessary.
Exposure Level: Select Auto adaptive or Illuminate off per actual need.
Exposure brightness processing mode: Select Engine computing or Device computing per actual need.
Power Plan: Two options are provided.
Power Saving: The terminal's built-in scanner turns off automatically after 3 seconds of inactivity.
High-performance: The terminal's built-in scanner turns off automatically after 15 seconds of inactivity.
OCR Enable: Select this check box when reading passports (compliant with ICAODoc9303 standards, TD1/TD2/TD3
supported).
33