Advertisement
OPERATION
1. Single Measurement
The device will enter single measurement when it is powered ON, press
measuring button
screen.
2. Continuous Measurement
Long press measuring button
aiming at the target and press measuring button
will be displayed accordingly.
*The continuous measurement will stop automatically after 5 minutes.
3. Wheel Measurement
Press mode switch button
measurement icon shows and flashes. Align the reference mark for wheel
measurement (5) with the starting point. Roll the wheel from the starting
point to the end point until the reference mark align with the end point, press
mode switch button
be displayed accordingly.
To continue wheel measurement, press mode switch button
To end wheel measurement, press measuring button
or long press mode switch button
after aiming at target to get result at bottom of the
again to stop the measurement, the current data will
Wheel measurement icon
to activate continuous measurement,
to activate wheel measurement. Wheel
to turn off the device.
6
to stop, the current data
again.
to change the mode
Advertisement
