Advertisement
THANK YOU FOR BUYING OUR PRODUCT.
To ensure your safety and satisfaction, carefully read through this OWNER'S
MANUAL before using the product.
CAUTION! Read, understand and follow all Safety Rules and Op-
erating Instructions in this Manual before using this product.
SAFETY INSTRUCTIONS
WARNING: BE SURE to read and understand all instructions in this manual before
using this product. Failure to follow all instructions may result in hazardous radiation
exposure, electric shock, and/or bodily injury.
CAUTION: Do not attempt to modify the performance of the laser device in any way.
This may result in a dangerous exposure to laser radiation.
WARNING: LASER RADIATION. Do not stare into beam. Class II laser product.
Turn the laser beam on only when using this tool.
WARNING: Use of controls, adjustments, or the performance of procedures other than
those specified in this manual may result in hazardous radiation exposure.
WARNING: The use of optical instruments such as, but not limited to, telescopes or
transits to view the laser beam will increase eye hazard.
This laser distance measure has a built-in laser light. The laser is a Class II and
emits output power of a maximum 1mW and 630-670nm wavelengths. These lasers
do not normally present an optical hazard. However, do not stare at the beam, as
this can cause flash blindness.
The following label is on your laser measuring tool. It indicates the location from
which the laser measuring tool emits the laser light. Be aware of the laser light
location when using the tool. Always make sure that any bystanders in the vicinity of
use are made aware of the dangers of looking directly into the laser.
Do not remove or deface any product labels.
•
•
Avoid direct eye exposure. The laser beam can cause flash blindness.
•
The laser distance measure is not a toy. Always keep it out of the reach
of children. The laser light emitted from this device should never be directed
toward any person for any reason.
•
Do not operate the tool around children or allow children to operate the tool.
Do not place the tool in a position that may cause anyone to stare at the laser
•
beam, whether intentionally or unintentionally.
1
Advertisement
