Advertisement
DISPLAY
1. Measurement reference (Front/Rear)
2. Laser indicator
3. Battery level
4. Previously measured value
5. Current measured value
6. Measuring unit
CHARGING
This product has a built-in lithium battery. Please use the original USB cable
while charging.
Laser distance meter may heat up a little when charging, it's normal, has no
effect on the device performance and service life. If it is not used for a long time,
unplug the charger.
SWITCH
Press On/Off button
flashes on the display.
When no button is pressed for about 30 seconds, the laser beam is automatically
turned off, and then the device is automatically turned off after about 3 minutes.
To turn off the device, press On/Off button
SET MEASURING REFERENCE
Measuring reference can be set at 2 different position, at the rear edge and at
the front edge. Rear edge is selected as the standard. It can be changed by
pushing measuring button
2
for 1 second to turn on the device. The laser indicator
and On/Off button
5
1
for 1 second.
simultaneously.
3
4
6
5
Advertisement
