Do not use on surfaces such as sheet steel that have shiny, reflective surfaces.
•
The reflective surface could reflect the beam back at the operator.
Always turn the laser tool off when not in use. Leaving the tool on increases
•
the risk of someone inadvertently staring into the laser beam.
Do not attempt to modify the performance of this laser device in any way. This
•
may result in a dangerous exposure to laser radiation.
Do not attempt to repair or disassemble the laser distance measure. If unqualified
•
persons attempt to repair this product, serious injury may occur. Any repair
required on this laser product should be performed only by authorized service
personnel.
•
Do not operate the tool in combustible areas, such as in the presence of
flammable liquids, gases, or dust.
•
Use of other accessories that have been designed for use with other laser tools
could result in serious injury.
2