Page 1
O P E R A T I N G I N S T R U C T I O N S i15 Lock Safety locking device...
Page 2
This work is protected by copyright. Any rights derived from the copyright shall be reserved for SICK AG. Reproduction of this document or parts of this document is only permissible within the limits of the legal determination of Copyright Law. Any modi‐...
Disposal..................... Technical data..................20 Technical data................... Dimensional drawings................8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock Subject to change without notice...
Page 4
11.2 Additional accessories................Annex....................25 12.1 Conformities and certificates..............O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
ABOUT THIS DOCUMENT About this document Scope These operating instructions are valid for all i15 Lock safety locking devices. This document is included with the following SICK part numbers (this document in all available language versions): 8022220 Additional information www.sick.com The following information is available on the Internet: •...
Page 6
Visible and invisible beam • A combination of multiple hazards O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
The product is only suitable for use in industrial environments. Incorrect use, improper modification of or tampering with the safety locking device will invalidate any warranty from SICK AG; in addition, any responsibility and liability of SICK AG for damage and secondary damage caused by this is excluded.
If voltage is disconnected at the magnet, the locking device is unlocked and the protec‐ tive device can be opened immediately. O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
✓ The locking device is unlocked. 8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock Subject to change without notice...
Page 10
After use, put back the mechanical unlocking mechanism, screw in the safety screw and seal (e.g. with locking varnish). O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
The results of this risk assessment may require the entity operating the machine to meet the obligations of a manufacturer. 8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock...
Determination of the thorough checks must be documented in a traceable manner. O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
Loosen the screws on the actuating head. Turn the actuating head in the desired direction. 8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock...
When doing painting work, cover the actuation slot, the actuator and the type label. O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
Protect the magnet coil separately. ° Tighten terminals to 0.5 Nm. ° 8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock Subject to change without notice...
Page 16
Close switch cover and fasten it (tightening torque 0.8 Nm). O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
No damage, contamination, deposits or wear • Tightness of cable entries 8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock Subject to change without notice...
Page 18
No loose cable connections or plug connectors • No manipulation by employees O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
Complementary information SICK will be glad to help you dispose of these devices on request. 8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock...
Solenoid supply voltage (+10% … –15%) AC/DC 24 V Max. solenoid power O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
M = 0,5 Nm M = 0,6 Nm 20,5 8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock Subject to change without notice...
Page 22
Figure 1: iE15-R1 ø 5,5 33,7 35,5 Figure 2: iE15-R2 O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
Type code Part number monitoring material Positive opening Positive opening Normally open normally closed normally closed contact contact Metal i15-EM0123 Lock 6034028 Metal i15-EM0133 Lock 6034029 Plastic i15-EP0123 Lock 6034030 Plastic i15-EP0133 Lock 6034031 i15 Lock with standby current locking principle...
Part number Cable gland M20 screw connection 5309164 O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
You can obtain declarations of conformity, certificates, and the current operating instructions for the product at www.sick.com. To do so, enter the product part number in the search field (part number: see the entry in the “P/N” or “Ident. no.” field on the type label).
Page 26
ANNEX O P E R A T I N G I N S T R U C T I O N S | i15 Lock 8020548/1FVF/2022-04-27 | SICK Subject to change without notice...
Page 27
ANNEX 8020548/1FVF/2022-04-27 | SICK O P E R A T I N G I N S T R U C T I O N S | i15 Lock Subject to change without notice...
Page 28
E-Mail office@sick.com.gr E-Mail info@sick.ru Vietnam Hong Kong Singapore Phone +65 6744 3732 Phone +852 2153 6300 Phone +65 6744 3732 E-Mail sales.gsg@sick.com E-Mail ghk@sick.com.hk E-Mail sales.gsg@sick.com Detailed addresses and further locations at www.sick.com SICK AG | Waldkirch | Germany | www.sick.com...
Need help?
Do you have a question about the i15-EM0123 and is the answer not in the manual?
Questions and answers