Casio EXILIM ZOOM EX-Z85 User Manual page 154

Problem
Images cannot be
edited (with Layout
Print, resizing,
trimming, keystone
correction, color
restoration, date/
time editing,
rotation).
Other
The wrong date
and time are
displayed.
The messages on
the display are in
the wrong
language.
Images cannot be
transferred over a
USB connection.
Language selection
screen appears
when the camera is
turned on.
Possible Cause and Recommended Action
1)Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
• Movies
• Snapshots recorded with another camera
2)With keystone correction and color restoration, editing is not
possible if the camera cannot find a shape to edit within the
frame on the monitor screen (pages 88, 89).
The date and time setting is off. Set the correct date and time
(page 125).
The wrong display language is selected. Change the display
language setting (page 126).
1)The USB cable may not be connected securely. Check all
connections.
2)The wrong USB communication protocol is selected. Select
the correct USB communication protocol in accordance with
the type of device you are connecting (pages 104, 113).
3)If the camera is not turned on, turn it on.
1)You did not configure initial settings after purchasing the
camera or the battery may have been left with a dead battery.
Check the camera setup (pages 13, 126).
2)There may be a problem with the camera's memory data. If
this is the case, perform the reset operation to initialize the
camera's setup (page 129). After that, configure each setting.
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera's memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
154
Appendix