Advertisement
Step 3
Fit the two base leg assemblies together and se-
cure with M6×20 bolts (F).
Step 4
Fit the connector (C) between the two tire
loops (D) and secure with M6×20 bolts (F).
Step 5
Fit the base support bar (B) between the two base
legs (A) and secure with M6×65 bolts (G) and
washers (H). Securely tighten all bolts with
wrenches.
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62832
Page 6
09 2021-1
Advertisement
