Advertisement
Quick Links
Operation Manual
Floor-mounted 2-bike Rack
62832
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 62832
Summary of Contents for WilTec 62832
- Page 1 Operation Manual Floor-mounted 2-bike Rack 62832 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Tire loop support Base support leg M6×20 screw Connection bar M6×65 screw Tire loop M8 washer Tools required • 10 mm wrench • 14 mm wrench © by WilTec Wildanger Technik GmbH Item 62832 Page 3 http://www.WilTec.de http://www.aoyue.eu 09 2021-1 http://www.teichtip.de...
- Page 4 Fit the two base leg assemblies together and se- cure with M6×20 screws (F). Step 4 Fit the connector bar (C) between the two tire loops (D) and secure with M6×20 bolts (F). © by WilTec Wildanger Technik GmbH Item 62832 Page 4 http://www.WilTec.de http://www.aoyue.eu 09 2021-1 http://www.teichtip.de...
- Page 5 Attach one tire loop (D) and one tire loop sup- port (E) to one of the base legs (A) using M6×20 bolts (F). Step 2 Repeat step 1 on the other base leg. © by WilTec Wildanger Technik GmbH Item 62832 Page 5 http://www.WilTec.de http://www.aoyue.eu 09 2021-1 http://www.teichtip.de...
- Page 6 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 62832 Page 6 http://www.WilTec.de...