Advertisement
Assembly instructions
When assembling the bicycle rack, tighten the bolts by hand until the entire part is fitted. When all the
parts are fitted, tighten all the bolts with wrenches.
There are two options for assembly.
•
Option 1 is designed so that both bicycles are on one side.
•
Option 2 is designed so that one bicycle can be mounted on either side of the stand.
Option 1
Step 1
Attach the tyre loop (D) to one of the base legs (A)
using M6×20 screws (F).
Step2
Attach the tire loop supports (E) to the other base
leg (A) using M6×20 screws (F).
Step 3
Fit the two base leg assemblies together and se-
cure with M6×20 screws (F).
Step 4
Fit the connector bar (C) between the two tire
loops (D) and secure with M6×20 bolts (F).
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62832
Page 4
09 2021-1
Advertisement
