Advertisement
Quick Links
Operation Manual
Foldable Laptop Table
63042
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 63042
Summary of Contents for WilTec 63042
- Page 1 Operation Manual Foldable Laptop Table 63042 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 The multi-angle foldability makes the table suitable for a variety of uses, such as a laptop stand, book or snack tray. Use it wherever you need it at any moment: on sofas on carpets or grass surfaces on beds on tables © by WilTec Wildanger Technik GmbH Item 63042 Page 3 http://www.WilTec.de http://www.aoyue.eu 08 2021-1...
- Page 4 Fig. 2 Once the holder is in place, rotate it 90 degrees to secure it to the laptop table. Edge: Fig. 3 This side should run parallel to you. © by WilTec Wildanger Technik GmbH Item 63042 Page 4 http://www.WilTec.de http://www.aoyue.eu 08 2021-1 http://www.teichtip.de...
- Page 5 Press the button down so that you can roll the support at any angle. • Release the button so that the joint locks into place. © by WilTec Wildanger Technik GmbH Item 63042 Page 5 http://www.WilTec.de http://www.aoyue.eu 08 2021-1 http://www.teichtip.de...
- Page 6 Set the opposite joints on each support to the same angle (so that the table is balanced). • Set the B joint to an angle that suits your needs. © by WilTec Wildanger Technik GmbH Item 63042 Page 6 http://www.WilTec.de http://www.aoyue.eu...
- Page 7 4. Set the opposite joints on each support to the same angle (so that the table is balanced). 5. Set the A joint to an angle that suits your needs. © by WilTec Wildanger Technik GmbH Item 63042 Page 7 http://www.WilTec.de...
- Page 8 Adjustable angles Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 63042 Page 8 http://www.WilTec.de...