Table of Contents
Advertisement
Specifi cations
• H - 27 7/8"
• W - 11 7/8" - Operational width - 13.6/8"
• Use of water dispense makes usable width 14"
• D- 24"
• Weight 79.5#
• Volts - 240
• Amps - 30
• Max Watts - 6000
heating which is a minor portion of the brew cycle)
• Hertz - 60
• Minimum Watts - 0 (most of the brew cycle uses no energy).
• No energy used when not in use. Unlike competitors which draw
energy 24 hours per day.
• Single phase
• Plug L14-30
• Water Line - 3/8"
Verifi cation
Before installing the brewer, verify that the electrical requirements agree
with the specifi cation on the brewer data plate, which is located on the
rear of unit.
Ensure that the water line supplying Bravura Press has the suggested
water fi ltration system attached.
Prior to Installation
Make sure:
•
The counter space is the proper fi t for the Bravura Press specifi cations.
•
The electric is built-in to the proper required code and proper outlet is installed.
•
The proper water hook-up is ready for installation.
•
The suggested water fi ltration system is installed on the water line that
supplies Bravura Press.
Place Bravura Press on the counter with the front edge of the base directly in line
with the counter edge.
Confi rm that the base of Bravura Press is level front-to-back and left-to-right.
Rotate feet accordingly until it is level.
Bravura Press operation is best when in close proximity to a sink and
trash receptacle.
Record your Bravura Press model and serial numbers for future reference in the
space provided below. This information can be found on the brewer data plate.
(unit only hits 6000 watts momentarily during
6
Advertisement
Table of Contents
