Table of Contents
Advertisement
Interior Cleaning
•
Place one tablet of coffee brewer cleaner, or the equivalent in powder
(according to the cleaner product instructions) into the removable
grounds chamber. Lock grounds chamber into place under the brew
chamber. Place lid in place on top of the brew chamber. Press wipers
to the bottom of the grounds chamber. Press RESET, then 3.0L,
followed by START for the coffee portion on the control panel.
•
Follow tablet/powder instructions for the amount of time the cleaner
should soak in the machine. Raise the wipers to the top of the brew
chamber. Dispense liquid, as if you were dispensing coffee.
•
Remove the grounds chamber and dump the remaining liquid.
•
Replace the grounds chamber and lock in place. Push the wip-
ers again to the bottom of the grounds chamber. Hit RESET, 3.0L,
START on the
control panel. Continue this rinse process until the cleaner is
completely rinsed from the interior surfaces.
•
This cleaning process should be done at the end of every day, and/or
inbetween brews if anything other than coffee has been in the brew
chamber or grounds chamber.
•
Maintain all safety measures during cleaning that you would during
brewing.
•
If there is any oil residue remaining in the interior portions of
Bravura Press where the product is brewed or dispensed, simply
wipe with a clean paper towel if it is coffee residue. For residue from
other products brewed use a wet cloth soaked in your health
department's suggestion for dishwashing and then dry completely
with a dry towel.
13
Advertisement
Table of Contents
