Table of Contents
Advertisement
5.
Check to make sure
the O-ring and
contact surface of
the battery com-
partment is not
damaged and is
free of dirt and
dust.
6.
Securely close the
battery cover and
rotate the battery cover
knob to the
position.
Rotate the knob until the
battery cover lock clicks
securely into place.
See page 38 for information about loading the memory card.
GETTING ACQUAINTED
Contact surface
O-ring
IMPORTANT!
• Do not use manganese batteries to power this cam-
era. Use only the specified types of AA-size batteries.
• Never open the battery cover while the operation lamp
is flashing. Doing so can cause the image record op-
eration to fail, and even damage the memory card.
• Never open the battery cover in an area where water
is present. Doing so creates the risk of water getting
inside the camera, resulting in unrepairable damage.
• Moving the camera from a warm room to the cold out-
doors makes pressure build up inside the camera,
which can make it difficult to open the battery cover.
• Using an O-ring that is damaged or soiled can result in
a loss of water resistance, which can lead to water
getting inside the camera and unrepairable damage.
• Whenever an O-ring becomes damaged or deformed,
take your camera to the nearest authorized CASIO
maintenance service provider to have it replaced.
Note that you will be charged for O-ring replacement.
31
Advertisement
Table of Contents
