Everybot EDGE Quick Manual page 2

How to use & Charge
·
Please charge the product fully before
the first operation.
·
Cautions When charging the battery, the button on
the main unit and the remote control
does not work.
·
Do not use any other power adapter other
than the adapter which came with the unit.
Yellow LED Blinks
Low Battery Level
1 2
Wet mops throughly in water Attach the mop pads to fit
and apply them in the main the joint parts to the holes
unit a er wringing them out. of the water supply mop kit.
Correct
Wrong
4 5
Close the rubber cap of the water Press the operation button
supply mop kit and attach the water more than 2sec. to turn on
supply mop kit into the bottom of the main unit.
the main unit. Pressing it while turning
side to side will install it with a click sound.
Blue LED Blinks LED is OFF
Medium Battery Level
Full Battery
3
Open the rubber cap of the
water supply mop kit and fill
the water into the water tank.
Correct Wrong
6
Press the operation button
on the main unit or play
button of a remote control
to startthe machine.
Cleaning Modes
Auto Cleaning Edge Cleaning
'Y' Cleaning Step Cleaning
Cautions when using the product
Do not use unauthorized Please wash the mops with
adaptors. detergent before of first using.
* It may cause serious damage * Otherwise there could
for the product. be tainted problem.
Focus Cleaning Intensive Cleaning
50min. Cleaning Manual Cleaning
Please separate the mop
from the water tank mop kit
a er finished operating.
* If the wet mops stay long
time on the floor, the floor may
be discolored or polluted.
separate
separate