Table of Contents
Advertisement
Installation and removal
5.5 Installing on a standard rail
3. Place the device on the upper edge of the corresponding mounting rail
– ① S7-300 standard rail
– ② S7-1500 standard rail
4. Swing the device to the standard rail
5. Screw the mounting adapters to the standard rail
for this are supplied with the bracket set; see "Installation (Page 24)".
6. Connect the power supply, refer to the section "Power supply (Page 63)".
7. Fit the antennas, refer to the section "Antennas (Page 67)".
54
.
on both sides. The screws needed
SCALANCE W1788-x / W1748-1
Operating Instructions, 03/2022, C79000-G8976-C484-05
:
Advertisement
Table of Contents
