Possible Causes Of Failure - EINHELL TE-AC 36/8 Li OF Set Original Operating Instructions

9. Possible causes of failure

Problem
The compressor
does not start.
The compressor
starts but there is no
pressure.
The compressor
starts, pressure is
shown on the pres-
sure gauge, but the
tools do not start.
Anl_TE_AC_36_8_Li_OF_Set_SPK13.indb 21 Anl_TE_AC_36_8_Li_OF_Set_SPK13.indb 21
GB
Cause
1. No power supply
2. The outside temperature is too low
3. The motor is overheated
1. The non-return valve has a leak.
2. The seals are damaged.
1. Loose hose connections.
2. Leak in a quick-lock coupling.
- 21 -
Solution
1. Check the batteries
2. Do not use at an outside tempera-
ture below +5° C.
3. Allow the motor to cool down. If
necessary, remedy the cause of the
overheating.
1. Replace the non-return valve.
2. Check the seals and have any da-
maged seals replaced by a service
center.
1. Check the compressed air hose
and tools and replace if necessary.
2. Check the quick-lock coupling and
replace if necessary.
28.02.2022 08:08:53 28.02.2022 08:08:53