Product Placement; Operation - AmazonBasics B07R3FXLLQ Manual

Product Placement

NOTICE For proper ventilation, a minimum distance of 5 cm must be
maintained behind the product.
• Move the product to the desired position.
• Connect the product to the socket-outlet.
• Activate the brakes by pushing them down.

Operation

Switching on/off
• Switching on: Set the on/off switch (C) to I.
• Switching off: Set the on/off switch (C) to 0.
NOTICE Shredder runs briefly after each pass to clear entry. Continuous
operation beyond 30 minutes triggers a 10-minute cool down
period.
Control panel
AUTO: While in "AUTO" mode, the motor does not start running until paper or
CD/card is inserted into the feed slot. Always feed the paper in as straight as
possible. When the paper or CD/card has passed through, the motor stops
automatically.
When the "AUTO" mode is activated, the
To deactivate the "AUTO" mode, press
Reverse: In an unlikely event of a paper jam, the reverse setting can be used
to help clear the cutters of material that did not pass through. Before clearing
a jam by using the reverse function, empty both bins.
Forward: The forward setting can also be used to help clear the cutters in the
event of a paper jam. It also allows to manually activate the shredding mode.
> 5 cm
button lights up blue.
again.
7