commercial cool CCRR16HB Manual page 12

CLEANING AND CARE
ENERGY SAVING TIPS
• The refrigerator should be located in
the coolest area of the room, away
from heat-producing appliances
or heating ducts, and out of direct
sunlight.
• Let hot foods cool to room
temperature before placing in
the refrigerator. Overloading the
refrigerator forces the compressor to
run longer and thus increase energy
consumption. Foods that refrigerate
too slowly may lose quality or spoil.
• Be sure to wrap foods properly, and
wipe containers dry before placing in
the refrigerator.
• The shelves should not be lined with
aluminum foil, wax paper, or paper
towels. This will interfere with cold air
circulation, making the refrigerator
less efficient.
• Organize food to reduce door
openings and extended searches.
Remove as many items as needed at
one time, and close the door as soon
as possible.
HOW TO DEFROST
• For maximum energy efficiency,
defrost freezer section whenever
frost accumulates to a thickness of
1/4" or more on freezer walls. Note
that frost tends to accumulate more
during the summer months.
• Remove the food and ice cube tray
to empty the freezer section. Make
sure the drip tray is in place (Fig A)
to collect the water dripping.
• Turn temperature control dial to
0 position and unplug the unit.
Defrosting may take a few hours.
To speed up defrost time, keep the
door open and place a bowl of warm
water in the freezer.
•
Page 12
• An ice scraper has been included for
your convenience. You can use it to
gently remove frost if needed.
• During defrost, water will accumulate
in the drip tray. Make sure it does not
overflow. Do not leave unattended.
• After defrosting, empty the drip
tray and wipe down the interior
of the freezer. When the drip tray
is thoroughly dried, return it to its
original position. You may now reset
your refrigerator to the desired
temperature and return food.
NOTE: · Do not heat the evaporator
directly with hot water or hair
dryer while defrosting. Doing
so will damage the freezer
compartment.
· Never use a sharp or metallic
instrument to remove frost as
it may damage the refrigerator
and puncture the cooling coils.
It will also void the warranty.
We recommend using a plastic
scraper.
Drip Tray
(Fig A)