Initial Setup And Basic Setting - HMM Diagnostics smartLAB bike3 User Manual

4. Initial setup and basic setting

For the 1st use, insert the battery into the device as above.
1. Here you can choose the language between English, German
and French. You can change the language with the MODE
button.ConfirmyourentrywiththeSETbutton.
2. Thistakesyoutothefirstsettingfortheunit.Youcanchoo-
se between KM or MIL here. You can do this with the MODE
button.ThenpresstheSETbuttontoconfirm.
3. Adjustment of the wheel circumference. See table below.
EntertheWSinthecomputerthatcorrespondstoyourbike
type.
4. Proceedasfollows:
5. PresstheMODEbuttononce.Yougettothefirstdigit.You
can change the number by pressing M.
6. ConfirmyourentrywiththeSETbutton.
7. You get to the next digit.
8. Repeat this process until all 4 digits are set.
9. Adjustment of the ODO. Set the 5 digit as described above.
10. Hiring of service. Here you can
11. Duringthefirstinstallation,BATTCHANGEappears.Please
leave YES. The function here is that in the future, when
the battery is changed, the set values are retained in the
memory for 30 seconds. You won't lose your setting when
you change the battery.
12. You get to the weight unit setting. You can choose between
KGandLBwiththeMODEbutton.ConfirmwiththeSET
button.
13. Adjustment of body weight. Set your weight with the MODE
and SET buttons.
14. Settingtheclockmode.Youcanchoosebetweena12
o'clockormidnightsystem.
15. Settingtheclock.Settheclock.
16. The device is now ready for use.