Table of Contents
Advertisement
Securing the appliance in position
1.
Open the appliance door.
2.
Using a suitably sized drill bit, drill through the three
holes in the bracket into the worktop (fig.4-12).
IMPortant: Use a drill bit suitable for the worktop
material.
3.
Using the screws supplied, fix the bracket to the
underside of the worktop. Fully tighten the screws.
4.
Check that the door opens and shuts without snagging.
Check that the door seals correctly.
Alternative method of securing
If your worktop is unsuitable for fixing in this manner, there
are 2 securing points in each hinge bracket (fig.4-13).
Using the screws supplied, fix the appliance to the adjoining
cabinet.
Cover trim
11
fig.4-11
Furniture door
fig.4-12
fig.4-13
Advertisement
Table of Contents
