Adjusting The Feet; Fitting The Plinth - Rangemaster U110120 - 01A Installation And User Manual

Adjusting the Feet

Make sure that the appliance is on solid level flooring. If the
refrigerator is placed on a plinth, flat, strong and fire resistant
materials must be used.
This fridge has front adjustable feet, which can be used to
level the appliance.
To accesss the levelling feet, first undo the screws on each
side of the grid (fig.4-5). Remove the grid.
Using a suitable spanner, adjust the feet. Turn the spanner
clockwise to raise the feet and counter-clockwise to lower the
feet (fig.4-6).
The appliance should be flush with the underside of the
worktop and be level.
IMPortant: If the appliance is not level, then the door and
door seal may be affected.
Refit the grid and secure in place.

Fitting the Plinth

You may decide to attach a plinth to match your existing
kitchen units.
Cut clearance in the plinth for ventilation (fig.4-7) and then
fit.
ArtNo.600-0059 - BILF - Adjusting the feet
9
fig.4-5
fig.4-6
fig.4-7
90 - 140 mm
600