Specifying The Auto Focus Area - Casio EXILIM EX-ZS10 User Manual

NOTE
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while "Auto" is selected. These values will
appear briefly, however, in the preview image that is displayed immediately after
you shoot a snapshot.
• If the flash fires, the Anti Shake icon S will remain on the display, even though
Anti Shake does not function during flash photography.
• The ISO sensitivity setting (page 66) must be "Auto" for Anti Shake to work.
• Shooting with Anti Shake can cause an image to appear somewhat coarser than
normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• Anti Shake is disabled during movie recording.
Specifying the Auto Focus Area (AF Area)
Procedure
[r] (REC) * [SET] * MENU * REC Tab * AF Area
This mode takes readings of a small area in the center of the
Spot
Û
image. This setting works well with focus lock (page 58).
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
Multi
È
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
Half-pressing the shutter button focuses on the subject and
Tracking
Ë
causes the focus frame to track the movement of the subject.
Spot" or
"Û
Focus frame
IMPORTANT!
• Selecting "Ë Tracking" can cause vibration and noise to occur due to lens
operation while tracking a subject. This does not indicate malfunction.
Ë Tracking"
"
È Multi"
"
Focus frame
61
Advanced Settings