Using The Camera With A Macintosh; Connecting The Camera To Your Computer And Saving Files - Casio EXILIM EX-ZS10 User Manual

Using the Camera with a Macintosh

Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
When you want to do
this:
Save images to your
Macintosh and view
them there manually
Save images to your
Macintosh
automatically/Manage
images
Play movies

Connecting the Camera to Your Computer and Saving Files

IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5, 10.6)
only. Use the standard USB driver that comes with your supported operating
system.
NOTE
• You also can use your computer's card slot (if it has one) or a commercially
available card reader to access image files directly from the camera's memory
card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1.
Turn on the camera. Next, press [SET] and then display the REC menu
(page 55) or the PLAY menu (page 71).
2.
On the "Set Up" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "Mass Storage", and then press [SET].
Operating
System Install this software:
Version
OS 9
Installation not required.
OS X
OS 9 Use commercially available software.
Use iPhoto, which comes bundled
OS X
with some Macintosh products.
You can playback with QuickTime,
OS 9, OS X which comes bundled with your
operating system.
97
See
page:
Using the Camera with a Computer
97
100
100