Advertisement
Intended use
•
The pipe cleaning machines may only be used for cleaning pipes with a diameter of 32 mm to
100 mm.
•
The pipe cleaning machines are only designed for short-term operation and are therefore only
permitted for max. 15 min of continuous operation! This device may only be used as specified.
Control/inspection
•
Prior to commissioning the pipe cleaning device, a visual inspection must be carried out to de-
tect leaks, damage, loose, missing, or worn parts.
•
The pipe cleaning unit must be inspected immediately if it has been overloaded or subjected to
a strong impact. The control should be carried out by a specialist. An annual inspection of the
pipe cleaning device is recommended. Defective parts must be replaced immediately. If this is
not possible, the device must not be put into operation again.
•
Regularly apply lubricant to all moving parts. Regularly check the cleaner for rust, cracks and
corrosion. Clean the affected areas with an oily cloth.
•
If scrapping of the cleaner is necessary, please recycle it.
•
Maintain your tools with care. Keep the cutting tools sharp and clean for better and safer oper-
ation. Follow the instructions for lubrication and tool change. Periodically check the power cable
connection and, if damaged, have it replaced by a recognised specialist. Check the extension
cables regularly and replace them if they are damaged. Keep handles dry, clean and free of
grease and oil.
Technical specifications
Energy supply
Tube diameter (㎜)
Max. length (m)
Spring diameter (㎜)
Rotational speed (
r
⁄
min
Weight (㎏)
Working weight (㎏)
Input/output power (W)
Scope of delivery
•
Pipe cleaning machine
•
Guide hose (6 parts, total 13.8 m)
•
Drilling and cutting heads
•
Gloves
•
Assembly tool
•
Manual
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
230 V, 50 Hz
32–100
14
16
)
400
22
12
390/250
Item 51451
Page 5
03
2022-1
Advertisement
