Q-See QT528 User Manual page 63

Click on Custom Level
5 If you get a error message that says the program cannot load because the publisher is unknown or the program is
unsigned, go to internet explorer, tools, internet options (refer to Pic 9), then go to the "Advanced" tab (RED box in Pic
14), this will open the window in Pic 15, scroll down to "Security", and select the options to "Allow software to run or
install even if the signature is invalid", and "Allow Active Content to Run Files on My Computer" (RED box in Pic 15).
To connect to the DVR from the remote computer you would then open an Internet Explorer browser window and enter
the internet IP of your router that you got by going to
Pic 12
Pic 14
On "Reset to" pull down menu, select "LOW" then
click on "RESET" button.
Click 'Yes' when asked: 'Are you sure you want to
change the setting for this zone?' Click OK. Click
Apply. Click OK. Close
Pic 13
www.myipaddress.com
62
Internet Explorer.
Pic 15
(you have to do this from a PC that