Advertisement
3. Carefully align and secure the gear on the bottom of the centrifuge bowl into the
gear on the spout, locking the centrifuge bowl in place.
Notes:
• Be careful when handling the centrifuge bowl as it is sharp on the bottom.
• Ensure the centrifuge bowl can rotate evenly and that it is not loosely
attached.
4. Place the lid/chute on the juicer so that it covers both the pulp collector and the
centrifuge bowl. Ensure the lid/chute fits tightly onto the base.
5. Lift the locking mechanism to engage with the lid/chute. The locking mechanism will
make a clicking sound when this is done correctly.
Advertisement
