Advertisement
11. Using supplied nylon bristle brush (PN 00674.0000)
thoroughly scrub the faucet body.
12. Allow the parts to soak in the sanitizer solution for a
minimum of five (5) minutes.
13. Remove the faucet parts from the sanitizer solution, and
allow to air-dry overnight.
14. Clean the faucet shank using the supplied nylon bristle
brush (PN 00674.0000).
15. Reassemble faucet.
16. Re-install sight gauge seal.
17. Re-install sight gauge tube.
18. Re-attach faucet to server shank by turning clockwise
direction. When reassembling - USE CAUTION: Do Not
over-tighten faucet wing nut - HAND TIGHTEN ONLY.
19. Clean the entire outside surface of the server, using a
clean SOFT, Non-abrasive cloth dampened with any mild,
non-citrus, non-abrasive, liquid detergent.
20. Thoroughly rinse the entire server after cleaning.
082321
CLEANING
11
12
13
15
17
19
6
14
16
18
Advertisement
