Checking The Package Contents; Names And Functions Of Each Part - Proxima DP6850 User Manual

Checking the package Contents

Make sure all of the following items are included in the package. If anything is missing, please contact your
dealer.
Projector unit
Power Cord 3
Video/Audio Cable
110V-US
220-UK, Europe

Names and functions of each part

Main unit
ZOOM button
Used to adjust the size of the
image. (Refer to page 13.)
MUTE button
This button turns the sound on and
off. Press once to turn the sound off;
then press again to turn the sound
back on.
STANDBY / ON button
Press this button to turn the power on
and off. When turned off, the projector
enters standby status. Refer to page 13
- 14 for details.
LAMP indicator
Lights or flashes when the temperature
inside the projector increases or the lamp
does not light. Refer to page 33 for details.
POWER indicator
This indicator lights or blinks during standby
and during operation. Refer to page 33 for
details.
Remote control I/R receiver
Lens
Lens cap
• Use the remote control in front of the remote control photoreceptor at a distance
of about 5 m or less and an angle of 30 degrees to the left or right of the center.
8
3 - C o n d u c t o r RGB Cable
(15-15 pin M/M)
Remote control
Remote control
Mac adapter S-Video Cable
with dip switch (S-Video mini Din4-pin)
Batteries
User's Guide (this document)
Stereo mini jack Mouse cable
c a b l e
FOCUS button
Used to adjust the focus of the image on the
screen. (Refer to page 13.)
INPUT button
Press this button to switch the input. The input
changes in the following sequence each time
this button is pressed.
RGB1 RGB2
MENU button
Displays the image menu. Refer to page 17 -
21 for details.
RESET button
Used to reset the initial settings.
Refer to page 10, 17, 25, 26 for details.
TEMP indicator
Blinks when the fan malfunctions.
Refer to page 33 for details.
Speaker
Carring handle
Cooling fan
(intake side)
3
VIDEO
Speaker
Cooling fan
(exhaust side)