Table of Contents
Advertisement
Operating WinHost
April 2022
Table 4-2: Signal information components
Element
NQ Ratio 2
4.1.3
Device status components
Table 4-3
Table 4-3: Device status components
Element
Status
Gain
Address
Change address
Note
Do not click the address finding button when more than one detector is connected.
4.1.4
Toolbar
Table 4-4: Toolbar Buttons
Button
14
describes the composition of the device status components in the main window.
Description
The detector's current operational status.
Electronic amplification.
Up and down arrows
The address currently viewed by the software. (You can change the
current address by using the up and down arrows).
Indicates the status of the communication between the detector and the
computer.
Changes address to that selected in dropdown menu
Button name
New address
Align
(continued)
Description
Ratio2/QO2 (Normalized ratio 2) Equals 2 when
no gas is present and goes down when gas is
introduced.
Description
Opens a dialog box that enables you to set a new
address location for the detector.
Aligns the detector with the source.
Reference Manual
00809-0200-4036
Emerson.com/Rosemount
Advertisement
Table of Contents
