Toro Workman GTX Series Installation Instructions Manual page 3

2. Install the 3 shovel mounts to the side upright frame
brackets with 12 carriage bolts (5/16 x 3/4 inch) and
12 flange nuts (5/16 inch) as shown in
Figure 2
1. Carriage bolt (5/16 x 3/4
inch)
2. Side upright frame bracket 4. Shovel mount
3. Loosely install the 2 front upright frame brackets to the
inside of the cargo bed with 4 hex-head screws (1/4 x
3/4 inch) as shown in
Figure 3
1. Front upright frame
bracket
Figure 2.
3. Flange nut (5/16 inch)
Figure 3.
2. Hex-head screw (1/4 x 3/4
inch)
4. Install the pipe bracket to the 2 side upright frame
brackets and front upright frame bracket with 6 carriage
bolts (5/16 x 3/4 inch) and 6 flange nuts (5/16 inch) as
shown in Figure
1. Pipe bracket
2. Flange nut (5/16 inch)
3. Side upright frame bracket
5. Install the front support bracket (with 2 holes on each
side) to the top of the 2 front upright frame brackets
with 4 carriage bolts (5/16 x 3/4 inch) and 4 flange
nuts (5/16 inch) as shown in
1. Carriage bolt (5/16 x 3/4
inch)
2. Flange nut (5/16 inch)
3
4.
Figure 4
4. Carriage bolt (5/16 x 3/4
inch)
5. Front upright frame
bracket
Figure 5.
Figure 5
3. Front support bracket (with
2 holes on each side)
4. Front upright frame
bracket