Asus H110T Manual page 14

Rear panel connectors
1 2
1. DC power connector. Insert the power adapter into this port.
2. USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 / 2.0
devices.
3. HDMI port.
and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected
content.
4. DisplayPort. This port is for DisplayPort-compatiable devices.
5. LAN (RJ-45) port. This port allows Gigabit connection to a Local
Area Network (LAN) through a network hub.
1-6
3 4
It can support both 19V and 12V DC input.
- Use a 90W adapter when a 35W CPU is installed on the system.
- Use a 120W adapter when using your system with an LVDS panel.
- Use a high-rated adapter (above 90W) when a high-rated CPU (45W or higher
CPU) is installed on the system.
and better performance from your USB 3.0 devices.
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
5 2
®
100 series chipset, all USB devices connected to the
Chapter 1: Product introduction
6 7
Speed
Activity Link
LED LED
LAN port