Table of Contents
Advertisement
Using the Vacuum
Looking for more guidance? Go to global.BISSELL.com for tips and
24-7 support while cleaning.
ICONpet™ Turbo can be used as a stick vacuum, hand vacuum or for extended reach with hand
vacuum + wand.
1.
Press the power button to
begin cleaning and to turn OFF
the machine when finished.
Note: All batteries differ when it comes to run time and power production. The cleaning mode
you choose and the surfaces you vacuum (long, thick carpet uses more power than short, low pile
carpet) affect run time and power produced. To better preserve run time and overall battery life,
use the power mode best suited to your cleaning task and only use TURBO mode when you need an
additional boost of suction power.
Using the Parking Brake
Go to global.BISSELL.com for additional how-to videos.
The parking brake helps prevent the wheels from sliding when the machine is leaning against a wall.
1.
To lock the wheels, push the
brake away from the brush roll.
WARNING
2.
Press the cleaning mode button to toggle between the
three settings.
•• High
For cleaning carpet and area rugs. This mode balances
power and run time. This is the default mode when the vacuum
is turned ON. Run time: Up to 20 minutes.
••• Turbo
minutes and then will default back to high power mode.
Run time: Up to 7 minutes.
• Standard
Run time: Up to 50 minutes.
Note: If your vacuum is difficult to push on carpet or is shutting
OFF abruptly, try reducing the power setting.
2.
Lean the machine against a
wall for temporary storage.
Do not use your vacuum until you are familiar with all instructions and operating procedures.
For maximum suction. This mode is active for 5
For hard floors. Offers the quietest sound.
3.
To disengage, pull the brake
toward the brush roll.
global.BISSELL.com 7
Advertisement
Table of Contents
