Unitronics CP1 Manual page 9

PASSWORD
Setpoint values for the system are protected by a Password Screen. This screen can only be accessed from the
START UP screen. Press the 0 and the 7 keys while of the START UP display—AND THEN RELEASE. Nothing
will happen until you take your fingers off the keys. The password can be obtained from your Chute Source
representative. Type in the code and then press the "Enter" key. If this is done properly the serial number for
the compactor will be displayed. If nothing happens press the UP ARROW KEY to return to the START UP
screen and begin the process again.
In order to verify warranty and to ensure that proper replacement parts are supplied when required, each
compactor is serialized. The serial number allows the manufacturer to track a specific compactor to a specific
location.
The Down Arrow key will move the operator to the Pressure Setpoint display while the Up Arrow key will
return the operator to the STARTUP display.
9