Table of Contents
Advertisement
A compactor should be serviced about every 15,000 cycles. The oil should be changed, and the photo eyes
cleaned, and the alignment checked. The first line of this display shows the number of cycles since the last oil
change. This counter is reset by touching the left arrow key. The second line displays the lifetime number of
cycles. The maximum count is 9,999,999. At this point the counter will automatically reset to zero.
If there is an alarm present in the system, the startup display will show the word alarm next to a down arrow.
Pressing the down arrow key will take the client to an alarm display. If he presses the down arrow key and no
alarm is present the display will read NO ALARM. The UP key will return the operator to the startup screen.
The Top Line of the Alarm Display will have 1 of four messages:
ALARM DISPLAY
No Alarm
Warning
"1" Reset Alarm
This type of alarm will not stop the compactor or interfere
with optional electrically operated doors. The message will
automatically clear at the end of the alarm condition.
This alarm will stop the compactor and inhibit the
operation of optional electrically operated doors. The
7
Advertisement
Table of Contents
