Panasonic CZ-TACG1 User Manual page 3

Do not set up where children can reach the adaptor.

- They may pull on it or cause themselves an injury.
Do not wipe with wet cloths or wash in water.

- This can cause electric shock or ignition.
WARNING
This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Request installation only from the place of purchase or an

installer.
- Not doing so may cause electric shock or ignition.
Shut off the power supply when installing this adaptor.

- Not doing so may cause electric shock.
Use only the specifi ed parts when installing the adaptor and

perform the installation correctly by following the instructions.
- Not doing so may cause electric shock or ignition.
Ensure cables are installed properly so that external forces

cannot affect them.
- Not doing so may cause overheating which can lead to ignition.
Stop use as soon as you notice any problems or malfunctions

and shut off the electric supply to the connected appliance.
- Not doing so may cause smoke, ignition, electric shock, or burns.
- Examples of problems and malfunctions
• There is a burning smell
• Water or a foreign object has gotten inside
 Immediately request repair from the place of purchase or the
installer.
CAUTION
The adaptor is indoor use only. Do not set up outside or in

unsecured locations.
- It may provide an entry point for unauthorised network access.
Do not set up in locations exposed to direct sunlight, where the

temperature may exceed 45°C or go below -5°C.
- This can cause deformation.
Do not install in locations where oils are used a lot or where steam

or sulphurous gases are emitted.
- This can cause loss of performance or deformation.
Before connecting wires and cables, discharge any static electricity.

- Not doing so may cause malfunction.
Check the following requirements in advanced (At home):

- There should be no abnormality in the air conditioner such as change
of airflow. Ensure no object(s) which may be displaced easily due to
the airflow blowing directly at it. The fallen or moved object(s) might
lead to danger such as fire, injury etc.
- At all times, use the in-house remote control when there is a possibility
of person(s) (such as infant, children, disabled person(s), elderly or
sickly person(s)) who are incapable of controlling the temperature
themselves and rely on the pre-set confi guration of the air-conditioner.
The rise and drop in the temperature due to remote operation might
cause the occupant(s) to experience discomfort and/or disrupt their
daily routine.
Plant(s) and animal(s) are likely to be affected by sudden temperature
adjustments.
Check the following requirements before operating the air

conditioner from a remote location:
- Do inform the person(s) in the vicinity of the area being air-conditioned
that you will remotely control the air conditioner operation and settings.
This is to avoid any possibility of serious effects on person(s)
either due to being taken by surprise or due to sudden changes in
temperature (from comfort to cold or vice versa).
(This may cause harm to human body due to sudden changes of
outside temperature and room temperature.
Temperature adjustment can be operated by remote control)
If the main display of the Panasonic Comfort Cloud APP does not
reflect the status of the operation, please use the in-house remote
control to operate the air-conditioner.
- As the APP uses network communication, there may be times
when remote operation is not possible due to communication and/or
network failures (such as Panasonic Cloud server downtime, telecom
providers' server downtime, WIFI connectivity etc.). In the event of
such failure(s), please use the in- house remote control to operate
the air-conditioner.
3