Technical Data - IKEA FINSMAKARE Manual

ENGLISH
Problem
The display shows an error
code that is not in this table.
Steam and condensation set‐
tle on the food and in the
cavity of the oven.
The lamp is turned off.
The door is locked.
Service data
If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical data

Technical data
Dimensions (internal)
Area of baking tray
Top heating element
Bottom heating element
Possible cause
There is an electrical fault.
You left the dish in the oven
for too long.
The Moist Fan Baking func‐
tion is turned on.
There was a power cut.
We recommend that you write the data here:
• Turn off the oven with the
• If the display shows the
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Normal behavior of the Moist
Fan Baking function. Refer to
"Daily Use" chapter, Heating
Functions.
Check the power supply.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not
remove the rating plate from the oven cavity.
.........................................
.........................................
.........................................
Width
Height
Depth
1438 cm²
2300 W
1000 W
Remedy
house fuse or the safety
switch in the fuse box and
turn it on again.
error code again, contact
an Authorised Service
Centre.
480 mm
361 mm
416 mm
33