IKEA FINSMAKARE Manual page 16

Hide thumbs Also See for FINSMAKARE:
Table of Contents

Advertisement

ENGLISH
Specials
Heating function
Bread Baking
Au Gratin
Dough Proving
Plate Warming
Preserving
Dehydrating
Keep Warm
Defrost
Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements (according to EU 65/2014 and
EU 66/2014). Tests according to:
Application
To bake bread.
For dishes such as lasa‐
gna or potato gratin. To
make gratins and to
brown.
To rise the yeast dough
before baking. When
you use this function
the lamp automatically
turns off after 30 sec‐
onds.
To preheat plates for
serving.
To preserve vegetables
(e.g., pickles).
To dry sliced fruit, veg‐
etables and mush‐
rooms.
To keep food warm.
To defrost food (vege‐
tables and fruit). The
defrosting time de‐
pends on the amount
and size of the frozen
food. When you use
this function the lamp
automatically turns off
after 30 seconds.
For EU: EN 60350-1
For UK: BS EN 60350-1
The oven door should be closed during
cooking so that the function is not
interrupted and the oven operates with the
highest energy efficiency possible.
When you use this function the lamp
automatically turns off after 30 sec.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking.
Setting a heating function
1. Turn on the oven.
2. Select the menu: Heating Functions.
3. Press
to confirm.
4. Select a heating function.
5. Press
to confirm.
6. Set the temperature.
7. Press
to confirm.
Setting a steam function
The water drawer cover is in the control
panel.
Warning! Use only cold tap water.
Do not use filtered
(demineralised) or distilled water.
Do not use other liquids. Do not
put flammable or alcoholic liquids
into the water drawer.
1. Press the cover of the water drawer to
open it.
2. Fill the water drawer with 900 ml of
water.
The water supply is sufficient for
approximately 55 - 60 minutes.
3. Push the water drawer to its initial
position.
4. Turn on the oven.
5. Set a steam heating function and the
temperature.
6. If necessary, set the function: Duration
or: End Time
When the steam generator is
empty, the signal sounds.
16
.

Advertisement

Table of Contents
loading

Table of Contents