Environmental Conditions; Qualified Personnel; Noise Emission Values - Fronius Primo GEN24 3.0 Operating Instructions Manual

All safety and danger notices on the device:
-
-
-
-
Only operate the device when all protection devices are fully functional. If the
protection devices are not fully functional, there is a danger of
-
-
Any safety devices that are not fully functional must be repaired by an author-
ized specialist before the device is switched on.
Never bypass or disable protection devices.
For the location of the safety and danger notices on the device, refer to the
chapter headed "Warning notices on the device" in the Operating Instructions for
your device.
Faults that could compromise safety must be remedied before switching on the
device.
Environmental Operation or storage of the device outside the stipulated area will be deemed as
conditions not in accordance with the intended purpose. The manufacturer accepts no liab-
ility for any damage resulting from improper use.
Qualified per- The servicing information contained in these operating instructions is intended
sonnel only for the use of qualified service engineers. An electric shock can be fatal. Do
not carry out any actions other than those described in the documentation. This
also applies to qualified personnel.
All cables and leads must be secured, undamaged, insulated and adequately di-
mensioned. Loose connections, scorched, damaged or inadequately dimensioned
cables and leads must be immediately repaired by authorised personnel.
Maintenance and repair work must only be carried out by an authorised special-
ist.
It is impossible to guarantee that bought-in parts are designed and manufac-
tured to meet the demands made on them, or that they satisfy safety require-
ments. Use only original spare parts (also applies to standard parts).
Do not carry out any alterations, installations, or modifications to the device
without first obtaining the manufacturer's permission.
Components that are not in perfect condition must be changed immediately.
Noise emission The sound power level of the inverter is specified in the
values
The device is cooled as quietly as possible with the aid of an electronic temperat-
ure control system; this depends on the amount of converted power, the ambient
temperature, the level of soiling of the device, etc.
It is not possible to provide a workplace-related emission value for this device
because the actual sound pressure level is heavily influenced by the installation
Must be kept in a legible state
Must not be damaged
Must not be removed
Must not be covered, pasted, or painted over
Injury or death to the operator or a third party
Damage to the device and other material assets belonging to the operating
company
Technical data.
9